Shoe impregnation - spray
Simple shoe impregnation spray
39 USD
Never put away dirty shoes.
If you need to wash, brush or impregnate the shoes, also remove the laces to get to the material underneath. When the insoles and laces are removed, you can clean the dirt off the outer material.
Generally, brushing with our ALFA brush and cleaning under running lukewarm water will be enough. For extra dirty boots use the ALFA cleaning spray, which removes dirt and stains.
Using Alfa Clean & Refresh Spray:
1. Remove loose dirt with a damp cloth.
2. Shake the bottle and spray evenly onto the shoes.
3. Use a damp cloth to clean off the rest of the dirt.
4. If necessary, rinse under lukewarm water.
5. Repeat the steps if necessary. Then let the shoes dry well.
The insoles absorb a lot of moisture and dry faster when taken out of the shoes. They should therefore be removed after each trip so that the shoes are able to air out and dry properly. This is especially important to keep in mind during multi-day trips.
If you've cleaned your shoes under running water, they must dry properly before any further treatment.
The best thing is to leave them out at room temperature for 24 hours. If you washed the insides, you can fill the shoes with newspaper for 30 minutes first, to absorb most of the moisture.
Your shoes do not withstand heat and we recommend not going above 37 degrees when drying your shoes. Never place your boots on a radiator, near the oven or any other heat source. The materials are easily damaged by excessive heat and can shrink and lose or change shape.
All our wool boots are untreated. That's because the lanolin in the wool acts as impregnation on it's own. But after time, it is important to impregnante the shoes again to protect the wool.
Our impregnation spray is effective in impregnating and protecting your shoes and boots from water and dirt. Our unique technology mimics nature's own chemistry, like a leaf that is water-repellent, and is biodegradable, kind to nature, and can be applied indoors without problem. The impregnation is PFC-free, and the bottle can be recycled.
Instructions:
Remove any dirt.
Shake the bottle well.
Evenly spray the product onto your shoes or boots.
Wipe any excess spray off with a cloth.
The boots should dry for 24 hours before using them again for maximum effect. With proper maintenance dirt will stick significantly less to the wool.
How often you have to impregnate your shoes depend on how much you use them, but generally wool does not have to be impregnated very often. This is because the lanolin in the wool acts as natural impregnation.
Store your shoes in a dry and well-aired place, where it's not too hot. Never keep your wet shoes in damp rooms or in the car, to prevent mold, discolouration and bad odours. Do not store your boots on heated floors with underheating, as this dries out the rubber and shortens the lifespan of the sole, as well as making the soles lose their grip.
With Alfa's wool maintenance kit, you get all the products you need to maintain your shoes to have great hiking experiences regardless of the weather, for many years to come.
Shop nowShoe impregnation - spray
Simple shoe impregnation spray
39 USD
Explore our Wool collection