Taking care of Nubuck shoes

Step 1 - Clean

Never put away dirty boots. If you are going to wash, brush or impregnate the boots, you should also remove the laces so that you can get to the material underneath them. When the insoles and laces are removed, clean off the dirt.

Generally, brushing with ALFA Nubuck brush and cleaning under running lukewarm water and some dish soap will be enough. For particularly dirty boots use the Alfa Clean & Refresh shoe cleaning spray to effectively remove stains and dirt.

Instructions:

1. Remove the majority of the dirt with a damp cloth.

2. Shake the bottle and spray evenly on the shoes or boots.

3. Use a damp cloth to remove the remaining dirt.

4. If necessary, rinse under the tap and dry your shoes or boots off with a cloth.

5. Repeat the steps if necessary and then impregnate the shoes afterwards.

The outer material of the cleaned shoes has more open pores and will absorb water more easily. Thus, your shoes or boots need to be impregnated to keep your feet dry.

Step 2 - Dry

If you cleaned your shoes with water, they need to dry properly before any further treatment. It's best to leave them out at room temperature for 24 hours. If you washed the inside, you can first fill your shoes with newspaper for 30 minutes to absorb the majority of the moisture. Your shoes do not withstand heat and we recommend not going above 37 degrees when drying your shoes. Never place your boots on a radiator, near the oven or any other heat source. The materials are easily damaged by excessive heat and can shrink and lose or change shape.

Step 3 - Grease

We recommend using grease specifically designed for nubuck leather that does not spoil the special appearance of the leather. The care products is more liquid and are less likely to clog the skin than creams with a higher wax content. You can use a cloth to apply the product.
Vigorous brushing generates heat, which helps with the absorption of the cream into the leather. Use the ALFA Nubuck Brush with its stiff bristels to freshen up the nubuck leather so it regains its suede appearance.

Step 4 - Impregnate

The ALFA Protection and Waterproofing Spray protect your shoes and boots from water and dirt. Our unique technology mimics nature, like a leaf that is water-repellent. The products are both biodegradable, kind to nature, and can easily be applied.

Instructions:

1. Clean the shoes or boots.

2. Shake the bottle well.

3. Spray the impregnation all over the shoes or boots.

4. Wipe off any excess impregnation product with a cloth.

5. The boots should dry for 24 hours for the best effect.

With proper maintenance, the leather becomes significantly less susceptible to any dirt sticking to the material. Furthermore, the impregnation protects against tears and damages to the leather.